Segway A200 E-Bike - Tire Repair Video

How to replace the tire

Tool preparation knife, crowbar, jigs, needle nose pliers Part 1: Remove the original tire Along the edge of the wheel hub, use a blade to cut the tires on both sides of the wheel. In order to avoid scratching the inner tube, make a shallow mark first. Be careful and slow to avoid scratching the wheel hub Then cut the outer tube vertically with knife and needle nose pliers Along the notch, along the wheel hub alternately cut both sides of the tire, and then take off the tire At this time, the inner tube is relatively loose, so the inner tube can be removed, and then the residual outer tube can be cut and taken out with a diagonal clamp. Part 2: Install the new tire Take the new outer tube and install the inner tube into the outer tube Place the tire on the wheel hub, and gradually cover the tire on the wheel hub with a crowbar along the periphery of the wheel hub. At this time, the outer tire edge is on the outside of the tire. Pry the outer tire edge to the inner side of the wheel hub with a crowbar, clamp it with jigs, and then pry the outer side of the tire to the inner side of the wheel hub with two crowbars alternately In the same way, install the tire on the other side onto the wheel hub After the tire is installed, use your hand to hit the wheel on the ground circle by circle to make the tire evenly installed on the wheel hub