Segway A200 E-Bike - Front Fender Repair Video
How to replace the front fender
Tool preparation: T20 bit, T25 bit, conner turner, electric screwdriver Part 1: Disassembly Remove 1 screw ST4.2x13 with T20 bit on the left side of the front fender, then remove 2 screws M5x10 with T25 bit. Remove 1 screw ST4.2x13 with T20 bit on the right side of the front fender, then remove 2 screws M5x10 with T25 bit. Then remove the front fender2 backward Remove the two screws M5x10 on the inside of front fender 1 with T25 bit and the corner truner. Remove 4 screws ST4.2x13 on out sides of the front fender2, then take out the front fender2. Part 2: Assembly Take the new front fender 2, install it backward into the front fork, align the screw holes, and fasten 4 screws ST4.2x13 on both sides of the front fork with T20 bit, Torque: 3-4N·m. Fasten the two screws M5x10 on the inside of front fender 1 with T25 bit and the corner truner, Torque: 5-7N·m. Install the front fender 2 and install it onto the front fender 1 from the rear to the front. Pay attention not to press the front brake line and motor line. Then, the fasten 2 screws M510 with T25 bit on the left side of the fender, Torque: 5-7N·m. Then fasten 1 screw ST4.2x13 with T20 bit, Torque: 3-4N·m. Fasten 2 screws M510 with T25 bit on the right side of the front fender, Torque: 5-7N·m. Then fasten 1 screw ST4.2x13 with T20 bit, Torque: 3-4N·m Turn the front wheel, there is no interference between the front wheel and the fender
Running a fleet on this hardware?
Levy Fleets runs scooters, e-bikes, mopeds and golf carts on the IoT hardware you already have, with integration pages for 29 vendors including Segway, Okai, Omni, Queclink, Invers and Comodule. Keyless unlock, geofencing, rider payments and rider support are included, and the Managed plan is a share of revenue with no per-vehicle software fee.