Segway A200 E-Bike - Bell Repair Video

How to replace the bell

Tool preparation: T25 bit, PH2 bit, electric screwdriver Part 1: Disassembly Loosen the cap screw of the handle grip clockwise with T25 bit, then remove the end cap. Hold the handle sleeve and take it out Loosen the fixing screw with PH2 bit, take down the fixing ring of handle grip outwards, and then take down the bell outwards. Part 2: Assembly Install the new bell with the metal end facing inward and next to the handlebar, install the fixing ring of the handle grip, align it with the screw hole, and fasten it with PH2 bit, Torque: 1-3N·m Install the handle grip with one end of the flat mouth facing inward, and fit it on the handle grip fixing ring. Turn the screw of the end cover of the handle grip anticlockwise with T25 bit to make the groove of the end cover clamp the inner edge properly, then install it on the handlebar and align it with the limit hole. Fasten the end cap screws with T25 bit clockwise, Torque: 5-7N·m