Acton Scooter BLE Configuration
This guide covers how to configure Acton scooters to connect to the Levy Fleets platform using the Omni BLE Tool app.
What You'll Need
- An Android or iOS device
- The scooter powered on with Bluetooth enabled
- The Omni BLE Tool app installed
This app is only needed for initial device setup. Once configured, you won't need it again.
Step 1: Download the App
Download the Omni BLE Tool app on your Android device:
| Platform | Download Link |
|---|---|
| Android | Download Omni BLE Tool APK |
| iOS | BLE Tool Plus on App Store |
Android users: You may need to enable "Install from Unknown Sources" in your Android settings to install the APK.
Step 2: Login to the App
Open the Omni BLE Tool app and log in with these credentials:
| Field | Value |
|---|---|
demo@levyelectric.com | |
| Password | Contact Levy support for the current operator credential |
Step 3: Select Device Setting
After logging in, choose the setting option that matches your scooter model. Picking the wrong one will write the wrong configuration to the device — the BLE write may appear to succeed, but the scooter will not connect.
| Acton Model | Setting Option | Typical Vehicle Number Prefix |
|---|---|---|
| Acton 2 (M-Pro and earlier) | FEISHEN_A | 1999200xxx |
| Acton 3 (newest model) | AKD-Scooter 3.0 | 19991210xxx, 250xxx |
Not sure which model you have?
Check the vehicle number printed on the deck or in the Levy Fleets dashboard. If the leading digits are 19992, it's an Acton 2 — use FEISHEN_A. If they're 199912 or 250, it's an Acton 3 — use AKD-Scooter 3.0.
Step 4: Connect to the Scooter
Enable Bluetooth
Ensure Bluetooth is enabled on your phone
Power On Scooter
Make sure the scooter is powered on
Scan for Devices
In the app, scan for nearby Bluetooth devices. Stay within 10 meters of the scooter.
Connect
Tap on your scooter to establish a Bluetooth connection
Step 5: Configure Server IP, Port & APN
After connecting to the scooter:
Navigate to Server Settings
Go to the IP/Port configuration menu in the app
Save Settings
Tap Save or Apply to write the settings to the device
Reboot Device
Send a reboot command or power cycle the scooter for changes to take effect
Verify Connection
After rebooting, wait 2-3 minutes then check Levy Fleets Dashboard > IoT Devices to confirm your device appears online.
Troubleshooting
Device not appearing in scan?
- Ensure you are within 10 meters of the scooter
- Make sure the scooter has battery power
- Check that Bluetooth and Location are enabled on your phone
- Try power cycling the scooter
Device not connecting after configuration?
- Verify you entered the correct IP: •••••sign in
- Confirm the port is set to •••••sign in
- Confirm the APN is set to
simbase(lowercase, no spaces, no username/password) - Make sure to reboot the IoT after saving settings
- Check that the SIM card has active data service
- Wait 2-3 minutes after reboot for the device to connect
Verifying Connection
After configuration:
- Wait 2-3 minutes for the device to establish connection
- Go to Levy Fleets Dashboard > IoT Devices
- Search for your device by IMEI
- The device should show as "Online" with recent telemetry data
Server Configuration Reference
| Device Type | IP Address | Port | APN |
|---|---|---|---|
| Acton | •••••sign in | •••••sign in | simbase |
| Feishen (飞神) | •••••sign in | •••••sign in | simbase |
| Segway / Omni | •••••sign in | •••••sign in | simbase |
| OKAI | •••••sign in | •••••sign in | simbase |
| Queclink | •••••sign in | •••••sign in | simbase |
Need Help?
Contact support@levyelectric.com with your device IMEI if you encounter issues. See also Omni IoT Integration for protocol details.