Segway S90L Electric Scooter - Iot Repair Video

Remove 2 screws M6*20 on the front tube(P1), then move out the IOT(P2), disconnect the wire harness of the IOT and remove the IOT(P3)

Take the IOT and connect the IOT cable harness (P4). Arrange the wire harness, put the excess wire harness into the vertical tube, and separate the brake lines on both sides of the vertical tube (P5). Then install the IOT on the vertical tube, first at the lower end and then at the top. Separate the instrument wiring harness and IOT wiring harness on both sides of the vertical tube, taking care that IOT does not squeeze into the wiring harness (P6). Then tighten 2 M6*20 screws with T30 batch head, torque 3.5-4N·m(P7)