Segway C80 E-Moped - Drum Brake Handle Repair Video

How to replace the drum brake handle

Tool preparation: 8mm wrench, Needle nose pliers Part 1: disassembly Remove the adjusting nut, lock column and spring for the rear brake line in turn Remove the nut with 8mm socket wrench. Position up and remove bolts with pointed nose pliers, Take out the brake handle and take out the brake wire from the brake handle groove Part 2: assembly Take the new brake handle, Install the brake wire from the slot of brake handle. Install the brake handle, Pay attention to the spring position. Align the screw holes and insert the bolts from above. Install the nut M5, and fasten it with 8mm wrench, Torque: 4-5N·m Install the spring and the lock column in turn, and pass the brake line through the round hole of the lock column, install the adjust nut. Pay attention to the full fit between the adjusting nut and the arc surface of the lock column, and expose 3-5 teeth of the brake line