Segway Max Pro (2.2) Electric Scooter - Rear Fender Assembly Repair Video

How to replace the rear fender assembly? Tool preparation Torque screwdriver, T20, H3, new rear foot pad, new fender. Remove the cover of the tail light wire. Push down the scooter, remove 2 screws M414 with T20, take off the cover and disconnect the tail light wire. Remove the rear fender assembly. Lift the scooter. Remove the rear foot pad, remove 4 cross pan head screws M48 with H3, then take off the rear fender assembly. Install the rear fender assembly fasten 4 Hexagon socket head flat washer blue white zinc plated combination screws with H3, Torque: 2±0.2N·m, Install the new rear foot pad. Install the cover of the tail light wire Push down the scooter. Connect the tail light wire, fasten 2 screws with T20, Torque: 1.5±0.2N·m, then lift the scooter Function detection Power on the scooter, and confirm that it functions properly

Prev: No Data ...