Segway Max Pro (2.2) Electric Scooter - Front Fender Repair Video

How to replace the front fender?Tool preparation Torque screwdriver, tweezers, H3 bit, PH2 bit, new fender, 2 new reflection stickers Remove the front fork covers Remove the four rubber plugs and two reflection stickers with tweezers, then remove 6 M48 screws with H3 on each side of the front fork. Separate the front fork covers on both sides by hand and remove the front fork covers Remove the front fender Remove the 4pcsST3.59.5 screws with the PH2, take away the front fender. Install the front fender Install the front fender, Tighten the 4 ST3.59.5 screws with the PH2, Torque: 1.6±0.1N·m Install the fork covers Install the new fork covers on the scooter and ensure that the front fork covers are fixed to each other, tighten 6 M48 screws on each side with the H3, Torque: 1.0-1.6N·m, install the four rubber plugs and two reflection stickers on each side of the front fork. Function detection Turn the front wheel, and confirm that it functions properly.