Segway Max Pro (2.2) Electric Scooter - Brake Function Repair Video

How to adjust the brake line

Tool preparation Needle nose pliers, 8mm wrench, brake jig

Hold the brake handle for three times, loosen the M5 nut, adjust the turn adjusting nut. Achieve the following results: Power on the scooter, clamp the brake handle with the 33mm end of brake jig, The left side of the jig should be flush with the first row of convex points of the handle bar grip. The rear light should be flash. Hold the stem and push the scooter in parallel, the front wheel can be turned. Power off the scooter, clamp the brake handle with the 30mm end of brake jig, same location as before. Now Hold the stem and push the scooter in parallel, the front wheel can not be turned, and the rear wheel will be cocked. Last step, fasten the M5 nut with 8mm wrench and the Needle nose plier, Torque: 5.5±0.5 N·m