Segway Max Pro (2.2) Electric Scooter - Bell Repair Video

How to replace the bell?Tool preparation Torque screwdriver, T20 bit, H2.5 bit, new bell, handle grips removal tool Remove the handlebar grips Remove the screw M414 on the handle grips with T20, take out the handlebar end cap, Remove the handlebar grips with handle grips removal tool. Remove the bell Remove the screw and the handlebar grip fixing ring with the H2.5, then take off the bell. Install the new bell Install the new bell, pay attention to the direction of the bell. Install the handlebar grip fixing ring and tighten the screw M516 with H2.5, Torque: 3-4N·m Install the handlebar grips Install handlebar grip and handlebar end cap, make sure to align them with limit hole. Tighten the screw M4*14 with T20, Torque: 1.8-2.2N·m Function detection Turn the bell or the electric throttle, and confirm that they function properly