Segway Max Pro (2.2) Electric Scooter - Battery With App Repair Video

How to replace the battery with APP? Tool preparation One Mobile phone, One fully charged battery Connect the phone to the scooter Power on the scooter, the Bluetooth will flash on the dashboard. Download and open “nRF Connect” on the phone, click the “connect” button, the Bluetooth will stop flashing when connected successfully. Open the cover of the battery compartment Click the arrow in the bottom right corner of the “Nordic UART RX Characteristic.” Key in the unlock command in the pop-up dialog box “5AA5013D20028E0110FF”, Click “write”. Then there will be alarm information on the instrument panel: E55. Power off the scooter, remove the cover of the battery compartment, disconnect the power cable, and take out the battery. Install the battery and the plate cover of the battery compartment Put the fully charged battery into the battery compartment, Lift the power plug at the controller to avoid being damaged by the battery, connect the power cable, and Install the pedal. Install the plate cover of the battery compartment, aligne the latch with the electronic lock, and press it. Function detection Power on the scooter to check scooter function properly.

Prev: No Data ...