Segway S90L Electric Scooter - Head Light Repair Video

Remove the 5 screw hole rubber plugs on the instrument(P1), use the T20 batch head to remove the 5 screws(P2), pull the phone holder back(P3), and then remove the instrument assembly(P4).

Find the cable(P5)between the headlights and the instrument assembly and disconnect; Using the H3 batch head, loosen the two screws on the headlight holder, remove the headlight holder using needle-nose pliers(P6)and pull the headlight out from the front of your forehead(P7).

Take the new headlight and send it into the forehead headlight hole(P8), install the headlight fixator with needle-nose pliers, and lock the 2 screws on the headlight fixator with H3 heads(P9).Find the headlight wiring harness and the instrument assembly corresponding wiring harness butt(P10), arrange the wiring harness, cover the instrument assembly.

Using T20 batch heads, lock the 5 screws(P11)on the instrument assembly and take rubber plugs to plug the 5 screw holes on the instrument assembly.