Segway S90L Electric Scooter - Rear Steering Light Repair Video

How to replace the rear steering light Remove the steering light assembly Power off, remove 2 inner hexagon stainless steel screws from decorative cover assembly with T20 head. Rear the reflective sticker, remove 2 screws M412 with T20 bit, disconnect the wire harness and remove the steering light assembly. Remove the steering light Remove 2 screws with T20 bit and remove the steering light housing, the remove the rear steering light. Install the steering light Take the new steering lamp, install it on the steering light cover with the wire harness facing up, and place the wire harness in the wire slot. Install the turn signal housing and lock the two M412 screws with T20 batch heads with a torque of 1.8± 0.2n·m. Install the steering light assembly Install the rear steering light assembly, connect the wiring harness, align the limit hole, and buckle the rear steering light assembly onto the frame. Fasten 4 M4*12 inner hexagon flower stainless steel screws with T20 batch heads with torque of 1.8±0.2N·m. Apply new reflectors. Power on the scooter and confirm that the replacement is normal.