Segway S90L Electric Scooter - Front Steering Light Repair Video

How to replace the front steering light Remove the front steering light Use T20 batch head to remove the screws at both ends of the cover and remove the cover; Use T10 batch heads to remove the 8 screws from the lower cover of the decorative cover. After removing the lower cover of the decorative cover, find the connecting wiring harness of the left and right turn signals and disconnect the connecting wiring harness; Use the T30 batch head to remove the brake handles on both sides screw, loosen the brake handle, remove it respectively, and then pull out the turn signal wiring harness on both sides. Install the front steering light Take two new front turn signals, send the turn signal wiring harness into the transverse pipe, install the brake handles on both sides respectively, and lock them with T30 head, with a torque of 5.5± 0.5n.m. Find the wiring harness corresponding to the left and right turn signals, pay attention to the corresponding colors, butt, and sort out the wiring harness; Take the lower cover of the decorative cover, install it according to the corresponding hole position, and use T10 heads to lock the corresponding 8 screws; Use T20 heads to lock the handle cover decoration cover on both sides, and complete the front turn signal replacement.