Segway L60E Electric Scooter - Rear Fender Repair Video

Remove the rubber pad (P1) from the rear fender, use the T20 batch head to remove the 4 screws (P2) holding the control area cover plate, use the T20 batch head to remove the 6 screws holding the rear fender assembly after removing the control area cover plate (P3)

Remove control area cover plate, remove rear fender assembly, disconnect rear taillight harness (P4)

Take the new rear fender assembly, connect the fender wiring harness with the red plug wiring harness on the controller (P5), arrange the wiring harness, install the rear fender in place, and use the T20 lot head to successively lock the 6 screws (P6) fixing the rear fender assembly with a torque of 1.5±0.2N·m; Take the cover plate of the control area, use the T20 batch head to lock the 4 screws (P7), and the torque is 1.5±0.2N·m; Take the new rear fender foot pad, attach the foot pad flat, and press it flat with your hand (P8), without wrinkles and warping.

Prev: No Data ...