Segway L60E Electric Scooter - Head Light Repair Video

Remove the headlight using the T20 batch head (P1) to remove the 2 screws holding the headlight; Use T10 bit to remove 1 screw (P2)securing the dashboard assembly, remove label on the front of the dashboard assembly (P3), and use T10 bit to remove 2 screws (P4) securing the front.

Pull out the dashboard assembly, locate the headlight harness (P5), disconnect the headlight harness, and remove the headlight.

Take a new headlight, insert the headlight into the headlight hole (P6) in the direction of head up and small head down, connect the headlight wiring harness to the dashboard assembly (P7), and arrange the wiring harness.

2 headlamp M48 screws (P8) were fixed with T20 batch head, torque: 1±0.1N·m; Insert the dashboard assembly into the vertical tube, use T10 batch head, lock 3 M312 screws (P9, P10) fixing the dashboard assembly, torque 1±0.1N·m; Take the label (P11) and stick it in the front position of the dashboard.