Segway C80 E-Moped - Kickstand Repair Video

How to replace the side kickstand

Tool preparation: 17mm wrench, screwdriver Part 1: disassembly Tilt or lift the vehicle properly, then remove the side brace bolt (P1, P2) with #18 wrench, and then remove the side kickstand, spring and bushing (P3, P4) Part 2: assembly Take a new side kickstand, make sure to sleeve the side kickstand bushing onto the mounting bracket, install the side brace with the big end on the inner side, install the bolt and fasten it with 17mm wrench, with a torque of 29-39N·m Install the side support spring, hang one end of it into the groove of the spring lug on the vehicle, and use a screwdriver to clip the other end into the side support spring lug. Pay attention to avoid the spring scratching the lug.