Segway B100 E-Bike - Iot Repair Video

Remove the 2 screws (P1) on the back of the IOT using the T30 batch head, extract the IOT(P2), and disconnect the wire harness connection (P3) on the IOT.

Take a new IOT, connect the IOT wiring harness with the main control wiring harness (P4), IOT into the hole, pay attention to the installation direction: the circular logo on IOT faces up, place (P5) from bottom to top, use T30 batch head to lock the 2 screws on the back of IOT and fix the torsion, torque: 3.5-4.0N·m.