Segway B100 E-Bike - Bell Repair Video

Loosen the screw (P1) on the cover of the left handle with the T20 head. After removing the cover, pull out the glove (P2).

Using the PH1 batch head, remove the locking screw (P3) from the retaining ring, remove the retaining ring, and remove the bell (P4)

When installing a new bell, pay attention to the installation direction of the bell: the main part of the bell faces the middle (P5). Fasten the handle ring (P6) with the PH1 head. Torque: 0.5-0.6N·m.

Take the gloves, pay attention to the glove and the grooves of the glove limit ring (P7, P8), put the gloves into the glove (P9), take the end cover of the gloves, align the slot and put it into the port position, put the end cover of the gloves into the socket, and there is no gap between the end cover and the sleeve (the leather hammer can be used to help knock in place), and use T20 batch head to lock (P10), torque: 4-4.5N·m, external pull sleeve confirm, can not pull out or no shift is ok.