Segway B100 E-Bike - Dashboard Assembly Repair Video

Remove label (P1) on the surface of the dashboard assembly; Remove 3 screws (P2) from dashboard assembly using T10 batch head.

Pull out the dashboard assembly and disconnect all wiring harness connections on the dashboard assembly (P3)

Take the new dashboard assembly and connect it one by one according to the corresponding color on the wire harness. After finishing the wire harness, plug the dashboard assembly into the vertical tube hole (P4).

Use T10 batch head to lock the 3 screws (P5) on the dashboard assembly, torque: 1±0.1N·m; Take the dashboard label and attach (P6) to the groove on the dashboard.

Prev: No Data ...