Segway E110L E-Moped - Seat Cushion Lock Repair Video

How to replace the seat cushion lock

Tool preparation: Mobile phone, 5.45mm pentagonal bit, PH2 bit, PH1 bit, electric screwdriver Part 1: Disassembly Power off the moped, open the seat cushion with APP, then remove 4 screws with 5.45mm inner Pentagon anti-theft bit Put down the seat cushion gently, taking care not to lock it. Lift up the seat barrel and seat cushion, then pull out and disconnect the seat cushion connecting wire, then take out the seat barrel and seat cushion Disconnect wire of the seat cushion lock, then remove 2 screws M612 with PH2 bit, then take out the seat cushion lock assembly Remove 1 screw with PH1 bit and remove the cover of the seat cushion lock, remove the cable lock and take off the seat cushion lock Part 2: Assembly Take the new seat cushion lock, and install the cable head, Clip the metal groove of the cable into the groove of the seat cushion lock. Install the cover and fasten 2 screws with PH1 bit, Torque: 0.9-1.1N·m. Install the seat cushion lock on the frame and fasten 2 screws M612 with PH2 bit, Torque: 7-11N·m. Then connect the wire harness Place the seat barrel and seat cushion assembly on the vehicle body, and connect the cushion cable. Then, install the seat barrel, fasten four pentagonal pan head screws M6*16 with 5.45mm inner Pentagon anti-theft bit, Torque: 9.8-14N·M. then close and lock the seat cushion.