Segway E110L E-Moped - Lock Control Assembly Repair Video

How to replace the lock control assembly

Tool preparation: 5.45mm pentagon bit, PH2 bit, Electric screwdriver, mobile phone Part 1: Disassembly Power off the moped, open the seat cushion with APP, then remove 4 screws with 5.45mm inner pentagon anti-theft bit Put down the seat cushion gently, taking care not to lock it. Lift up the seat barrel and seat cushion, then pull out and disconnect the seat cushion connecting wire, then take out the seat barrel and seat cushion Disconnect the wire harnesses of the lock control assembly, remove 2 screws M616 with PH2 bit, then take off the lock control assembly Part 2: Assembly Install the new lock control assembly on the frame, and fasten 2 screws M616 with PH2 bit, Torque: 7-11N·m, then connect the wire harnessed. Place the seat barrel and seat cushion assembly on the vehicle body, and connect the cushion cable. Then, install the seat barrel, fasten four pentagonal pan head screws M6*16 with 5.45mm inner Pentagon anti-theft bit, Torque: 9.8-14N·M. then close and lock the seat cushion.