Segway C80 E-Moped - Seat Cushion Repair Video
How to replace the seat cushion
Tool preparation:10mm socket wrench, mobile phone, Electric screwdriver Part 1: disassembly Opens the cushion with APP, take out and disconnect the sensing harness connection. Remove 2 flange nuts M6 with 10mm socket wrench and remove the seat cushion. Part 2: assembly Install the seat cushion: insert the hinge hole into the bolt post of the seat cushion, install the two flange nuts M6, and fasten them with 10mm socket wrench, Torque: 8-12N·m. Connect the sensing harness terminal and clip it into the cable slot, close and lock the cushion.
Running a fleet on this hardware?
Levy Fleets runs scooters, e-bikes, mopeds and golf carts on the IoT hardware you already have, with integration pages for 29 vendors including Segway, Okai, Omni, Queclink, Invers and Comodule. Keyless unlock, geofencing, rider payments and rider support are included, and the Managed plan is a share of revenue with no per-vehicle software fee.