Segway C80 E-Moped - Pedal And Crack Repair Video

How to replace the pedal and crank

Tool preparation: 12.3mm customized pentagonal wrench, flat screwdriver, L type H5 bit, crank puller, open end wrench/16mm wrench Part 1: disassembly Pry open the crank cable blocking cover with flat screwdriver, remove the fixing bolt with 12.3mm pentagonal wrench, and remove the crank and pedal assembly with the crank puller and open-end wrench. Remove the crank puller, Align the pedal screw hole clockwise with H5 bit, and remove the pedal. Part 2: assembly Install the foot pedal, which is installed on the end without protrusion of the crank, and fasten it with H5 bit rotating anticlockwise, Torque: 7-11N·m. Put the crank onto the central shaft, fasten 1 M8*20 bolt with 12.3mm pentagonal wrench, Torque: 28-33N·m, and finally cover the cable blocking cover., pay attention to the direction of the cranks on both sides, at an angle of 180 degrees.