Segway C80 E-Moped - Front Fender Repair Video
How to replace the front fender
Tool preparation: 3.95mm pentagonal bit, PH2 bit, 10mm socket wrench, Electric screwdriver Part 1: disassembly Remove the bolts on the inside of the fender on both sides with 10# wrench, remove the screws M612 on both sides of front wheel with 3.95mm pentagonal bit, and then revmoe the front fender assembly. Remove 1 screw st4.212 with PH2 bit, take out the rear part of the fender and remove the self-tapping clip st2.4. Part 2: assembly Take the new rear part of the fender, install one automatic clip st2.4. then install it together with the front part of the fender, fasten 1 screw st4.212 with PH2 bit, Torque: 1.9-2.7N·m Install the front fender assembly with the big head in front, align the screw holes, Fasten the left and right two screws M612 with 3.95mm pentagonal bit, Torque: 7-11N·m, then install the bolts M6*12 on both sides, and fasten them with 10mm wrench, Torque: 8-12N·m.
Prev: No Data ...
Running a fleet on this hardware?
Levy Fleets runs scooters, e-bikes, mopeds and golf carts on the IoT hardware you already have, with integration pages for 29 vendors including Segway, Okai, Omni, Queclink, Invers and Comodule. Keyless unlock, geofencing, rider payments and rider support are included, and the Managed plan is a share of revenue with no per-vehicle software fee.