Segway C80 E-Moped - Dashboard Repair Video
How to replace the dashboard assembly
Tool preparation: 2.7mm pentagonal bit, tweezers, Electric screwdriver Part 1: disassembly Gently pry along the periphery of the side cover to remove the panel side cover of the dashboard. Remove the 4 screws M310 with 2.7mm pentagonal bit, take out the dashboard, press both sides of the terminal and disconnect the connection cable, and remove the dashboard. Part 2: assembly Install the dashboard, plug in the terminal, pay attention to the direction of the terminal, and press the dashboard to snap the buttons. Fasten 4 screws M310 with 2.7mm pentagonal bit, Torque: 0.8-1.2N*m. Then install the dashboard side cover, pay attention to the limit holes to distinguish front and back of the cover.
Running a fleet on this hardware?
Levy Fleets runs scooters, e-bikes, mopeds and golf carts on the IoT hardware you already have, with integration pages for 29 vendors including Segway, Okai, Omni, Queclink, Invers and Comodule. Keyless unlock, geofencing, rider payments and rider support are included, and the Managed plan is a share of revenue with no per-vehicle software fee.