Segway E110L E-Moped - Seat Box And Seat Cushion Repair Video

How to replace the seat box and seat cushion

Tool preparation: mobile phone, 5.45mm pentagon anti-theft bit, 10mm wrench Part 1: Disassembly Power off the moped, open the seat cushion with APP, then remove 4 screws with 5.45mm inner Pentagon anti-theft bit Put down the seat cushion gently, taking care not to lock it. Lift up the seat barrel and seat cushion, then pull out and disconnect the seat cushion connecting wire, then take out the seat barrel and seat cushion Remove 2 nuts M6 with 10mm wrench, disconnect the seat barrel and the seat cushion, then pull out the cushion pin and take out the hinge Part 2: Assembly Take the new seat barrel, install the hinge and pin; Install the new seat cushion and fasten 2 nut M6 with 10mm wrench, Torque: 8-12N·M Place the seat barrel and seat cushion assembly on the vehicle body, and connect the cushion cable. Then, install the seat barrel, fasten four pentagonal pan head screws M6*16 with 5.45mm inner Pentagon anti-theft bit, Torque: 9.8-14N·M. then close and lock the seat cushion.