Segway C80 E-Moped - Seat Cushion Repair Video

How to replace the seat cushion

Tool preparation:10mm socket wrench, mobile phone, Electric screwdriver Part 1: disassembly Opens the cushion with APP, take out and disconnect the sensing harness connection. Remove 2 flange nuts M6 with 10mm socket wrench and remove the seat cushion. Part 2: assembly Install the seat cushion: insert the hinge hole into the bolt post of the seat cushion, install the two flange nuts M6, and fasten them with 10mm socket wrench, Torque: 8-12N·m. Connect the sensing harness terminal and clip it into the cable slot, close and lock the cushion.