Segway C80 E-Moped - Dashboard Repair Video

How to replace the dashboard assembly

Tool preparation: 2.7mm pentagonal bit, tweezers, Electric screwdriver Part 1: disassembly Gently pry along the periphery of the side cover to remove the panel side cover of the dashboard. Remove the 4 screws M310 with 2.7mm pentagonal bit, take out the dashboard, press both sides of the terminal and disconnect the connection cable, and remove the dashboard. Part 2: assembly Install the dashboard, plug in the terminal, pay attention to the direction of the terminal, and press the dashboard to snap the buttons. Fasten 4 screws M310 with 2.7mm pentagonal bit, Torque: 0.8-1.2N*m. Then install the dashboard side cover, pay attention to the limit holes to distinguish front and back of the cover.