Segway B200 E-Bike - Bell Repair Video

Tool preparation: Electric screwdriver, T25 bit, T10 bit Operating steps: Use T25 bit to remove the screw covering the end of the handlebar grip(P1), and remove the handlebar grip end cover, then pull out the handlebar grip(P2)

Use T10 bit to remove the screw M3×8 from the retaining ring(P3), then remove the retaining ring and bell(P4, P5)

Get a new bell, then put the big part of it into the handle towards the brake handle(P6), and inserting the retaining ring(P7), use T10 bit to lock the screw M3×8 of the retaining ring(Torque: 0.5-0.6N·m) and the screw must not protrude from the surface of the retaining ring(P8)

Get the handlebar grip, and the handlebar grip will be placed in the groove(P9, P10) corresponding to the limit ring (P11)

Place the handlebar grip end cover in the slot of the handlebar grip card, and use a leather mallet to tap the end cover in place without gaps(P12), then use T25 bit to lock the screw of the end cover(Torque: 4-4.5N·m), then fixed torsion:4.5 N·m (P13)