Segway L60E Electric Scooter - Handlebar Grips Repair Video

Use T20 batch head to remove the screw (P1) holding the handle cover and remove the handle cover; Pull out handle sleeve (P2)

Take the new handle sleeve, put the sleeve into the handlebar (P3), align the sleeve bulge with the fixing ring groove and load until the sleeve completely covers the fixing ring; Take the sleeve end cover and align it with the slot and put it into the port of the sleeve so that the sleeve end cover and the sleeve are installed in place. Tighten the plug screw (P4) and lock it with the T20 lot head. The torque is 3.5-3.7N·m.