Segway C80 E-Moped - Cable Lock Repair Video

How to replace the cable lock

Tool preparation: 2.7mm pentagonal bit, Electric screwdriver Part 1: disassembly Remove the indicator board on the cable lock, remove the screws M48 with 2.7mm pentagonal bit on the lock, disconnect the wire harness, then remove the cable lock. Part 2: assembly Install the new cable lock, connect the control harness, buckle it to the lock base, the end with lock tongue is upward. Fasten the screws M48 with 2.7mm pentagonal bit, Torque: 1.8-2.2N·m, then attach the label.