Segway B200 E-Bike - Left And Right Crank Repair Video

Tool preparation: Electric screwdriver, crank puller, crank seven point nut sleeve, adjustable wrench, straight screwdriver, 15mm open wrench Operating steps: Use a straight screwdriver to pry off the crank dust covers(P1, P2), and use crank seven point nut sleeve to loosen crank lock nut counterclockwise(P3, P4)

Load the crank puller into the crank, turn the crank puller clockwise with an adjustable wrench (P5, P6), and remove the crank and pedal

Use 15mm open wrench to remove the left pedal clockwise and remove the right pedal counterclockwise (P7, P8)

Remove the left and right crank (P9, P10)

Get the new left and right crank(P11, P12), and the Angle between the two is 180° mounted on both sides of the moment of the moment center axis (mounted towards the body)(P13, P14)

Apply the crank lock nut with blue medium thread glue 180°, and use crank seven point nut sleeve to lock crank lock nut clockwise(Torque: 65-70N·m), then fixed torsion: 70 N·m (P15, P16)

Install the crank dust covers(P17, P18)

Get the left and right pedal(P19, P20), and use 15mm open wrench to lock the left pedal counterclockwise and lock the right pedal clockwise(Torque: 37-42N·m) (P21, P22)