Segway B100 E-Bike - Handlebar Grip Repair Video

Loosen the screw (P1) on the end cover of the handle with the T20 head. After removing the end cover of the handle, pull out the glove (P2).

Take a new glove, make sure that the glove corresponds to the groove of the glove limit ring (P3, P4), put it into the glove (P5), take the end cover of the glove, align the slot and put it into the port position. After putting it in, there is no gap between the end cover of the glove and the sleeve (the leather hammer can be used to assist the tapping in place), and use T20 batch head to lock (P6), torque: 4-4.5N·m, external pull sleeve confirm, can not pull out or no shift is OK.