Security Deposit Hold
A security deposit hold is a refundable authorization on the renter's card, placed at pickup before the vehicle unlocks. Nothing is charged when the hold is placed. It is given back at the end of the rental, unless you capture part or all of it, for example for confirmed damage or an unpaid balance.
The hold works the same way for every vehicle type booked through reservations, cars included.
The Hold Is Off by Default
Each fleet decides whether to use it. Turn it on in Settings > Rides > Book Ahead with Hold a refundable security deposit at pickup, then save the settings page.
With the switch off, no hold is placed at check-in, and the package's Deposit Amount is charged at booking as a prepayment toward the rental price, as before. Holds that already exist can still be released or captured from the reservation page.
The Deposit Amount Is Paid Once
The package's Deposit Amount is used one way or the other, never both:
| The switch is | At booking | At pickup | At return |
|---|---|---|---|
| Off (default) | The Deposit Amount (at most the rental total) is charged as a prepayment toward the rental price | No hold | The rest of the rental is charged |
| On | Nothing is charged. The renter needs a saved card to book | The Deposit Amount is held on the card | The rental is charged; the hold is released after a clean return |
Bookings made before you turn the switch on keep their terms: a booking that already paid the Deposit Amount at booking is not held again at pickup. Nothing is ever charged or refunded retroactively when you change the switch.
What Is Held
The hold is the rental package's Deposit Amount (Rentals > Pricing), times the number of vehicles booked. A package without a Deposit Amount holds nothing.
One amount, one place
With the hold on, the Deposit Amount is held at pickup instead of being charged at booking. The app shows renters "Charged now" as nothing, the deposit as held at pickup and released after a clean return, and the rental total as charged at return.
The Damage deposit field in Settings > Car sharing is shown to renters on your branded rental page. It is not the amount held.
When It Is Placed
The hold is placed when the renter checks in in the app, on their card, before the vehicle unlocks. If their bank asks for a verification step, the app shows it. If the card is declined, the renter is asked for another card.
Only renters on app versions that support the hold are asked for it in the app. A check-in done from the dashboard places the hold on the renter's saved card. If the bank needs the renter to confirm it, or declines it, you can still check in without the hold, but only by giving a reason, which is recorded on the reservation's activity history.
When It Is Released
| Situation | What happens |
|---|---|
| Returned in the app, nothing owed, no return photos required | Released at return |
| Returned in the app with return photos, the comparison finds no new damage | Released automatically once the rental is closed with nothing owed |
| You record No new damage on the return inspection | Released once the rental is closed with nothing owed |
| The return comparison is still running | Kept until it finishes |
| Suspected new damage at return | Kept for your review |
| A required assessment is missing or the photo service was unavailable | The renter can return the vehicle. Check the task, inspect the vehicle, and release the hold if it is clear |
| You record Confirm new damage | Kept for you to capture what is owed |
| Money is still owed after the return | Kept |
| The booking is cancelled, or the renter does not pick up | Released |
| Returned from the dashboard, no damage recorded | The same rules as a return in the app |
| Returned from the dashboard with damage recorded | Kept for you to capture what is owed |
See Vehicle Inspections and Condition Reports for what counts as suspected damage.
The issuer sets the authorization deadline. Once the deadline passes, the hold can no longer be captured.
Renewing a Hold During a Longer Rental
The active reservation shows the bank's deadline when available. Within 24 hours of the deadline, or after the hold expires, the renter can use Renew security deposit to authorize the same amount on their saved card. If the bank asks the renter to confirm, the app opens that step. The previous valid hold is released after the bank confirms the replacement. Both authorizations may appear briefly. If the replacement is declined or still pending, the renter can still return the vehicle.
The Security Deposit Panel
Open the reservation. The Security deposit panel says where the hold stands:
| State | Meaning |
|---|---|
| Not required | The package has no Deposit Amount, or your fleet does not hold a deposit at pickup |
| Prepaid at booking | The booking was made before the hold was turned on and paid the Deposit Amount at booking, so no hold is placed |
| Awaiting the renter's card | The hold is placed when the renter checks in from the app, or the renter's bank is asking them to approve it |
| No hold placed | The rental was checked in without a hold (from an older app version, or from the dashboard with the hold skipped for a recorded reason), or the booking ended before pickup |
| Held | The amount is held on the renter's card. Nothing is charged |
| Released | The hold was removed. Nothing was charged |
| Partly captured | Part of the hold was charged; the rest was released |
| Captured | The whole hold was charged |
| Failed | The card did not approve the hold |
Amounts are in the reservation's currency and times in its time zone. Earlier attempts are listed under the current state.
Capture From Deposit
While the deposit is Held:
Open the capture form
Click Capture from deposit. The amount starts at the whole hold and cannot be more than the hold.
Choose a reason
Choose Damage, Unpaid balance or Other, and add a note if you want. An unpaid-balance capture cannot be more than the booking's balance due.
Confirm
The confirmation states the amount charged to the renter's card, what remains of the hold (released, not charged), and what happens to the booking. A damage or other capture is recorded on the deposit and does not change the booking's total or balance due. An unpaid-balance capture is applied to the balance due. Click Charge with the amount to capture.
A capture cannot be undone from the reservation page.
After you record Confirm new damage on a return inspection, the Damage confirmed box on the reservation also offers Capture from deposit. It opens the same form with the reason set to Damage; you still choose the amount and confirm.
Release Hold
Click Release hold and confirm. The hold is removed from the renter's card. Nothing is charged, and this is not a refund: no money was taken. Once released, the deposit can no longer be captured, for damage or anything else.
Permissions
Capturing or releasing a deposit needs the Issue refunds permission. If the provider result is uncertain, reload the reservation to see whether the operation was confirmed before trying again.
Need Help?
For questions about deposit holds, contact us at support@levyelectric.com.